RAPID GATE SDAUT
The rapid roll-up door model SDAUT is especially suitable for installation in holes that are positioned both outside and inside of any industry, trade and logistics warehouse.
Its position in areas with high-traffic load forklifts is common.
This model incorporates a system of repairs of their collision against the same backdrop. In case of having suffered an accidental impact, this laterally out of their guides, returning to make the lace of this in her opening maneuver, without having suffered any damage or breakage, do not be equipped with any type of interior horizontal rail way booster that could be affected to the collision.
Maximum dimensions: 5500 mm X 5200 mm.
Threshold of 400 mm. 550 mm. (GAAP)
Vertical Bracelet (non-drive side): 120 mm.
Vertical wrist (motor side): 350 mm.
This model incorporates the internal guidance of extruded aluminium with recordable tapas in profiled galvanized sheet steel of 1.5 mm. thickness standard finish: galvanized. Possibility of delivering in primed finish wash primmer or painted with polyurethane paint (RAL to choose color or stainless steel)
Vertical guides highlights profile of seal polyethylene to prevent the entry of dust or air currents.
Recordable top drawer where the mechanisms are housed to the coil of pvc sheet, shaft-drive in extruded aluminium with bearings fitted with grease nipples for subsequent maintenance.
Galvanized thickness: 2 mm. Quality: DX51D Z-275NA
Steel stainless thickness: 2 mm. Quality: AISI 304
All of our doors are made with high quality plastic canvas with resistance to wear, abrasion, discoloration and comply with certificate flame retardant type M2. Colors in samples (red, yellow, green, dark blue, blue light, white, black, grey, cream, orange).
All welds made on the canvas are made by high frequency welding.
Polyester support: 1100 Dtex.
Total weight: 900 g/m2
Breaking strength: 400 / 360 daN / 5 cm
Tear resistance: 80/60 daN
Adhesion: 12 daN / 5 cm
Temperature resistance: - 30 ° 7 + 70th
Lacquered: 2 faces
Windows: PVC glass, great resistenciabr>
Three-phase motor with direct attack on the primary shaft, electric brake of soft stop c/c++ and manual release of the crank at the height of the engine. End of race mechanics or encoder integrated in the engine to control the position of the door at any moment.
FEATURES MOTOR REDUCER
Voltage: 220 / 380
Power: 0.75 3 CV according to door
Protection: IP 54
Input rpm: 1400
RPM output: 92 142
Through photocells transceiver, housed in vertical door guides, security system type test before performing maneuvers closing.
Bottom of the curtain with conveyor systems antisquash safety, with detector type optical supervised at all times, inside bottom of danger, signposted as mobile danger zone finished yellow diagonal stripes in black. Signal of the same type Radioband system via radio monitored before the closing manoeuvre, thus avoiding the placement of curly dock type cables.
Optionally door can provide a system of opening by battery type ups (uninterrupted power supply) in case of alarm or lack of power supply.
Metal box for the maneuvers of control, designed for Speed Door España complying with regulations of electric protection of low voltage. In the joins a circuit board with control logic, designed to perform thousands of operations a day, equipped with LEDs for control functions or possible anomalies of the door.
Contactors, motor guard, adjustable, preinstallation magnetic detector, receiver or flashing lights. Buttons for opening, closing, emergency stop and led indicator of voltage on front cover. Connection to their diet with 1.5 metres of cable 5 x 2.5, with plug 16 A Cetac type.
CONTROL and push-button (optional): Handles ceiling Detector photoelectric cells of movement and emitting presence to distancia-pulsadores additional-interconexionada with any machine, roller, or assembly line.