Stackable fast door model SDN is specially designed to work under pressure or depressions of air, being therefore suitable installation in holes that are positioned towards the outside. Position is usual just behind the gates of the enclosure of the installation. This model incorporates Interior bars horizontal reinforcement mode which gives extreme rigidity and allows to reach the majority of existing sizes.

Maximum dimensions: 5400 mm X 5500 mm.
Lintel: 900 mm (GAAP)
Vertical Bracelet (non-drive side): 220 mm.
Vertical wrist (motor side): 650 mm.

All of our doors are manufactured in aluminium casting, profiled galvanized sheet steel of 2 mm thick. Given normal galvanized, possibility of delivering in primed finish wash primmer or painted with polyurethane paint (colour RAL desired by the client and/or stainless steel).
Vertical guides series highlights with sealing brushes to prevent the entry of dust or air currents. Top drawer where mechanisms for the drag of the tapes using aluminum pulleys, staying shaft-drive with bearings fitted with grease nipples for subsequent maintenance and elastic plate of union between the motor and the shaft, thus avoiding the possible misalignment and vibration in the engine manoeuvres.
Galvanized thickness: 2 mm. Quality: DX51D Z-275NA
Steel stainless thickness: 2 mm. Quality: AISI 304

All of our doors are made with high quality plastic canvas with resistance to wear, abrasion, discoloration and comply with certificate flame retardant type M2. Colors in samples (red, yellow, green, dark blue, blue light, white, black, grey, cream, orange).
All welds made on the canvas are made by high frequency welding. Includes area of viewers type rectangular apaisados at the height of the view.

Polyester support: 1100 Dtex.
Total weight: 900 g/m2
Breaking strength: 400 / 360 daN / 5 cm
Tear resistance: 80/60 daN
Adhesion: 12 daN / 5 cm
Temperature resistance: - 30 ° 7 + 70th
Lacquered: 2 faces
Windows: PVC, glass of high resistance

Three-phase motor with direct attack on the primary shaft, electric brake of soft stop c/c++ and manual release of the crank at the height of the engine. End of race mechanics or encoder integrated in the engine to control the position of the door at any moment. Standard speed between 1 and 1.8 m/s.

Rpm: 1400/3000
Voltage: 220 / 380
Phases: III
Power: 0.75 3 CV according to door
Protection: IP 54
Brake: electromagnetic
Input rpm: 1400
RPM output: 92 142

Through photocells transceiver, housed in vertical door guides, security system type test before performing maneuvers closing.
Bottom of the curtain with conveyor systems antisquash safety, with detector type optical supervised at all times, inside bottom of danger, signposted as mobile danger zone finished yellow diagonal stripes in black. Signal of the same type Radioband system via radio monitored before the closing manoeuvre, thus avoiding the placement of curly dock type cables.
Optionally the door can provide a system of opening by counterweight or battery type ups (uninterrupted power supply) in case of alarm or lack of power supply.

Metal box for the maneuvers of control, designed for Speed Door España complying with regulations of electric protection of low voltage. In the joins a circuit board with control logic, designed to perform thousands of operations a day, equipped with LEDs for control functions or possible anomalies of the door.
Contactors, motor guard, adjustable, preinstallation magnetic detector, receiver or flashing lights. Buttons for opening, closing, emergency stop and led indicator of voltage on front cover. Connection to their diet with 1.5 metres of cable 5 x 2.5, with plug 16 A Cetac type.

CONTROL and push-button (optional): Handles ceiling, photocells, motion detector and presence, issuing remote, additional buttons, interconexionada with any machine, roller, or assembly line.